Modeling,design, and optimization of a cost‐effective and reliable hybrid renewable energy system integrated with desalination using the division algorithm

People in the Middle East are facing the problem of freshwater shortages. This problem is more intense for a remote region, which has no access to the power grid. The use of seawater desalination technology integrated with the generated energy unit by renewable energy sources could help overcome this problem. In this study, we refer a seawater reverse osmosis desalination (SWROD) plant with a capacity of 1.5 m³/h used on Larak Island, Iran. Moreover, for producing fresh water and meet the load demand of the SWROD plant, three different stand‐alone hybrid renewable energy systems (SAHRES), namely wind turbine (WT)/photovoltaic (PV)/battery bank storage (BBS), PV/BBS, and WT/BBS are modeled and investigated. The optimization problem was coded in MATLAB software. Furthermore, the optimized results were obtained by the division algorithm (DA). The DA has been developed to solve the sizing problem of three SAHRES configurations by considering the object function's constraints. These results show that this improved algorithm has been simpler, more precise, faster, and more flexible than a genetic algorithm (GA) in solving problems. Moreover, the minimum total life cycle cost (TLCC = 243 763$), with minimum loss of power supply probability (LPSP = 0%) and maximum reliability, was related to the WT/PV/BBS configuration. WT/PV/BBS is also the best configuration to use less battery as a backup unit (69 units). The batteries in this configuration have a longer life cycle (maximum average of annual battery charge level) than two other configurations (93.86%). Moreover, the optimized results have shown that utilizing the configuration of WT/PV/BBS could lead to attaining a cost‐effective and green (without environmental pollution) SAHRES, with high reliability for remote areas, with appropriate potential of wind and solar irradiance.     

Sulphonated (PVDF-co-HFP)-graphene oxide composite polymer electrolyte membrane for HI decomposition by electrolysis in thermochemical iodine-sulphur cycle for hydrogen production

In overall iodine-sulphur (I-S) cycle (Bunsen reaction), HI decomposition is a serious challenge for improvement in H₂ production efficiency. Herein, we are reporting an electrochemical process for HI decomposition and simultaneous H₂ and I₂ production. Commercial Nafion 117 membrane has been generally utilized as a separator, which also showed huge water transport (electro-osmosis), and deterioration in conductivity due to dehydration. We report sulphonated poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP) (SCP) and sulphonated graphene oxide (SGO) composite stable and efficient polymer electrolyte membrane (PEM) for HI electrolysis and H₂ production. Different SCP/SGO composite PEMs were prepared and extensively characterized for water content, ion-exchange capacity (IEC), conductivity, and stabilities (mechanical, chemical, and thermal) in comparison with commercial Nafion117 membrane. Most suitable optimized SCP/SGO-30 composite PEM exhibited 6.78 × 10^?2 S cm^?1 conductivity in comparison with 9.60 × 10^?2 S cm^?1 for Nafion® 117. The electro-osmotic flux ofSCP/SGO-30 composite PEM (2.53 × 10^?4 cm s^?1) was also comparatively lower than Nafion® 117 membrane (2.75 × 10^?4 cm s^?1). For HI electrolysis experiments, SCP/SGO-30 composite PEM showed good performance such as 93.4% current efficiency (η), and 0.043 kWh/mol-H₂ power consumption (Ψ). Further, intelligent architecture of SCP/SGO composite PEM, in which hydrophilic SGO was introduced between fluorinated polymer by strong hydrogen bonding, high efficiency and performance make them suitable candidate for electrochemical HI decomposition, and other diversified electrochemical processes.     

Synthetic copolymer (AM/AMPS/DMDAAC/SSS) as rheology modifier and fluid loss additive at HTHP for water-based drilling fluids

In the petroleum industry, high temperature and high pressure (HTHP) would dramatically worsen rheological properties and increase fluid loss volumes of drilling fluids. Synthetic polymer as an indispensable additive has attracted more and more attention recently. In this article, a new copolymer (named AADS) of 2-acrylamide-2-methylpropanesulfonic acid, acrylamide, dimethyl diallyl ammonium chloride, and sodium styrene sulfonate was synthesized through aqueous solution polymerization. The chemical structure of the copolymer was characterized by Fourier transform infrared spectroscopy and nuclear magnetic resonance. Moreover, its thermal stability was simultaneously analyzed using a differential scanning calorimetry. The results showed that the synthetic polymer contained all the designed functional groups, and its structure was consistent to the desired one. Under contamination of sodium chloride, AADS solution maintained relatively high viscosity in high concentration brine, showing a good antisalt capacity. Furthermore, the effect of AADS content and temperature on rheological behavior and fluid loss volume of the water-based drilling fluid (WBDF) containing the synthesized product were investigated according to the American Petroleum Institute standard. Results showed that the rheological and filtration properties of the prepared WBDF were improved with the increase in the AADS concentration before and after the thermal aging test. In addition, in the temperature range of 80–240 °C, a reversible rheological behavior was observed during the heating–cooling process, and the HTHP fluid loss was controlled within 22.5 mL, suggesting that the copolymer AADS was suitable for making WBDF s with high temperature resistance. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47813.     

1 GWt PB-FHR负荷跟踪运行特性分析

为研究熔盐堆系统在商业应用中的价值，分析其是否满足电网负荷的变化需求和安全运行的能力，本文以1 GWt球床式氟盐冷却高温堆（PB-FHR）为研究对象，仿真计算其在负荷跟踪模式下的瞬态行为和运行特性。以RELAP5/MOD4.0程序为研究工具，并植入相关的熔盐物性与计算关系式，建立氟盐冷却高温堆的热工水力系统与功率控制系统的仿真模型，对典型负荷工况参数变化情况下控制系统的响应特性进行仿真分析。结果表明：该氟盐冷却高温堆系统在设计的控制逻辑的调控下，展示出良好的负荷跟踪运行能力，堆芯功率能迅速响应负荷变化，功率超调和温度超调小，反应堆的运行参数始终处于合理的运行范围内。     

High-Tg porous polyimide films with low dielectric constant derived from spiro-(adamantane-2,9′(2′,7′-diamino)-fluorene)

Porous polyimide (PI) films with low dielectric constants and excellent thermal properties have been a pressing demand for the next generation of high-performance, miniature, and ultrathin microelectronic devices. A series of novel porous PI films containing fluorenyl-adamantane groups were prepared successfully via thermolysis of poly(ethylene glycol) (PEG) added in the PI matrix. The cross-sectional morphologies of porous PI films showed closed pores with diameters ranging from 135 to 158 nm, which were uniform and regular in shape without interconnectivity. These porous PI films exhibited excellent thermal properties with a glass-transition temperature at 376 °C whereas the 5% weight loss temperature in air excess of 405 °C due to enhanced rigidity afforded by fluorenyl-adamantane groups. Accompanied by thermolysis content of PEG increasing from 0 to 20 wt %, the density of porous PI films decreased, and the corresponding porosity grew significantly from 0 to 11.48%. Depending on porosity, the dielectric constant and dielectric loss of porous PI films significantly declined from 2.89 to 2.37 and from 0.050 to 0.021, respectively. These excellent properties benefit the as-prepared porous PI films for application as interlayer dielectrics, integrated circuit chips, or multichip modules in microelectronic fields. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47313.     

炼化装置高压串低压风险分析

结合高压串低压事故,运用保护层风险分析方法进行系统分析,帮助操作人员从保护层管理方面出发,更加直观的分析装置工艺设计与操作中存在的隐患与缺陷,从而更好的防止事故发生。     

高能电子成像研究进展

本文通过蒙特卡罗程序EGS模拟研究了电子束与靶的相互作用，对成像束流光学进行了设计，并对束流匹配对空间分辨的影响、超快分束技术和产生横向均匀束技术等进行了模拟研究。实验验证了高能电子成像能达到μm量级的空间分辨，并可实现厚度、密度分辨及明-暗场成像等特点。同时给出了后续实验及研究计划，希望进一步提高高能电子成像性能并拓宽其应用领域。     

罩式退火温度对高强IF钢组织及性能的影响

为研究不同退火温度下高强IF钢的组织性能及织构的变化规律,采用温箱式电阻炉加热模拟罩式退火工艺,研究了不同退火温度下高强IF钢210P1冷轧板力学性能;对不同退火温度钢板的r90进行了统计并对其进行显微组织观察;采用X射线衍射仪及热场发射扫描电镜对不同退火温度的罩式退火成品板进行了织构分析。结果表明,在高强IF钢210P1冷轧板的罩式退火过程中,提高退火温度将使晶粒明显长大。随着退火温度的升高,屈服强度及抗拉强度下降,伸长率升高,n值略有上升,板材横向r值增加较明显,有利织构{111}取向密度增加,不利织构{100}取向密度降低。     

Behavior of 316L stainless steel containing corrosion pits under cyclic loading

The environmental performance of 316L grade stainless steel, in the form of tensile specimens containing a single corrosion pit with various aspect ratios, under cyclic loading in aerated chloride solutions is investigated in this study. Results from environmental tests were compared and contrasted with those obtained using finite element analysis (FEA). Fractography of the failed specimens obtained from experiments revealed that fatigue crack initiation took place at the base of the shallow pit. The crack initiation shifted towards the shoulder and the mouth of the pit for pits of increasing depth. This process is well predicted by FEA, as the strain contour maps show that strain is the highest around the centric strip of the pit. However, for shallow pits, local strain is uniformly distributed around that strip but begins to concentrate more towards the shoulder and the mouth region for increasingly deep pits.